网络 載流量; 载流量
- Current-carrying capacity of transmission lines obtained by setting conservative weather conditions limits the exertion of line heat capacity most of the time.
通过设定保守环境条件而确定的输电线路允许载流量在大部分时间内限制了线路热载荷能力的发挥。 - The earthing installations must have a current-carrying capacity sufficient to deal with the maximum fault currents, and a grounding resistance low enough to prevent a dangerous voltage appearing between any points which a man could reach simultaneously.
接地装置应该有通过最大故障电流的载流容量，且具有足够低的接地电阻以避免此时人员可达到的任何点上出现危险电压。 - The Research of Relationship of Wire Current-carrying Capacity, Temperature and Energy Conservation
导线载流量、载流温度及节能间关系的探讨 - If using busbar bridge between switchgears or inlet wire cabinets, should provide rated current-carrying capacity, span and height from the ground of the busbar bridge.
如开关柜之间或进线柜需要母线桥连接，应提供母线桥的额定载流量，母线桥的跨度，距地高度等具体数据。 - Ampacity Ampacity is the safe current-carrying capacity of an electrical conductor in amperes as defined by code.
载流容量载流容量是以安培数来定义导线安全载流能力。 - Super-conductive transmission cable has the advantages of large current-carrying capability, low losses and small volume, which is the important way to solve the problem of power transmission with high capacity and low losses.
超导输电电缆具有截流能力大、损耗低和体积小的优点，是解决大容量、低损耗输电的一个重要途径。 - The hot pressing promotes the transformation of the second phase into Bi ( 2223) and improves the current-carrying capacity of the tapes.
热压过程促使第二相部分转变为超导相Bi（2223），进而提高带材的载流能力。 - This article describes the design principle of the device and its parts, analyses the safe current-carrying capacity, voltage drop, sliding contact and are extinction performances of the device.
文章介绍了装置的设计思想和部件设计原理，对产品的安全载流、电压损失、滑接性能、灭弧性能进行了分析。 - Raising the allowable temperature of the steel-core aluminum conductor from 70 ℃, the temperature stipulated by current regulation, to 80 ℃ can improve 23%-27% of the current-carrying capacity of the conductor.
将钢芯铝绞线允许温度由现行规范规定的70℃提高到80℃，可提高线路输送容量23%~27%。 - The operating current of cable is required when analyzing the power cable thermal field and calculating the dynamic current-carrying capacity.
分析电缆稳态温度场与动态载流量时需要已知电缆工作电流大小。 - However, the arc power of TIG is limited because of current-carrying capacity of its welding electrodes is finitude, and the deposition efficiency is low. Particularly welding the middle thickness of the welded structure, the need to open and multi-layer welding groove.
但是TIG焊由于其电极的载流能力有限，电弧功率受到限制，熔敷速度低，尤其是中等厚度的焊接结构，需要开坡口和多层焊。